SIG CLIPPED WING CUB KIT

SIGRC26

Sold Out $166.99

In 1969 Hazel Sig, Then President of Sig Mfg. Co., rebuilt a standard 1941 Piper J-3 Cub for airshow flying. To increase the plane's aerobatic performance, 40 inches were clipped off each wing panel and the engine was reworked for greater horsepower.
The result is a highly aerobatic Cub that is a real joy to fly! Smooth aileron rolls, snap rolls, immelmann turns, and many other rolling maneuvers which are difficult in a standard wing J-3, are easy with the Clipped Wing Cub.

This 1/6-scale model inherits all of the delightful flight characteristics of Hazel's full-scale Clipped Wing Cub.

Wingspan

56 in

1422 mm

Wing Area

557 sq in

35.9 dm²

Length

43.5 in

1105 mm

Radio Required

4-Channel with 4 Standard Servos (not included)

Engine Required
(not included)

Set Up Specifications

Accessories

2-Stroke .25-.40 (4.1 - 6.0 cc)
4-Stroke .40-.45 (6.0 - 6.5 cc)

Elevator	1/2	inch	12.7	mm	Up and Down
Rudder	1	inch	25.4	mm	Right and Left
Ailerons	3/8	inch	9.5	mm	Up and Down
Center of Gravity	2-1/8 - 3-1/8	inch	54 - 79	mm	Back from Leading Edge
Dihedral	0.4375	inch	11.1	mm	Up at W-4 Rib
Incidence	+1 degree wing, 0 degree stabilizer
Engine Offset	1 degree down, 0 degree right

	English		Metric		Number Required
Pilot	2 5/8	inch	66	mm	1
Main Wheels	3	inch	76	mm	2
Tail Wheel	1		25	mm	1
Fuel Tank	6 to 8	ounce	180 to 240	cc	1
Spinner	May use a Prop Nut of a size to fit the engine selected
Covering	3 rolls

KIT FEATURES

Built-Up Balsa Construction

Strong One-Piece Wing

Engine Mounts

Hardware Package

Spruce Wing Struts

Full-Size Plans

Molded Plastic Cowling

Formed Wire Landing Gear

Authentic Decals

Illustrated Assembly Manual

Clipped Wing Cub Kit Instruction Manual Click title to open in a new window.
	Pdf (1.6 Mb) Download