SIG KADET LT-25 KIT

SIG MANUFACTURING

SIGRC74

Sold Out $204.99

Since its introduction, the SIG KADET LT-40 has become the R/C trainer of choice at many club fields, Not long after its introduction, we started getting requests for a smaller version of the same airplane. So the compact version of the LT-40 was born - the SIG KADET LT-25. As you would expect, the new LT-25 inherits all the same gentle flying characteristics of the other legendary SIG KADETS.
It has the same light wing loading, which allows it to fly slow enough to give the student pilot time to think and react. It has the same "hands off" stability on all axis. If the student pilot gets disoriented, simply let go of the sticks and the LT-25 will recover and return to level flight within seconds.
In addition, the new KADET LT-25 has a couple of features that are "firsts" for any SIG KADET. It's the smallest "full-house" 4-channel KADET we've ever produced, with ailerons, elevator, rudder, and throttle control standard. It has a taildragger landing gear! In the interest of keeping the flying weight of this little gem as light as possible, we've elected to go with the simplicity of a taildragger landing gear. With a wide-stance main gear and a shallow angle of attack on the ground, the LT-25 takes off and lands just as easily as most tricycle gear models. Last, but not least, it's the first SIG KADET that is all laser cut! The CAD drawn plans and CNC (computer controlled) laser cutter insure the parts fit perfectly. You've never built a kit that went together this good!
Wingspan 63 in 1600 mm Wing Area 724 sq in 46.7 dm² Length 50.75 in 1289 mm Flying Weight 4 - 4.25 lb 1814 - 2041 g Wing Loading 12 - 13 oz/sq ft 39 - 44 g/dm² Radio Required 3-Channel with 4 Standard Servos (not included) Engine Required (not included)   Set Up Specifications                               Accessories 2-Stroke .25 - .32 cu in (4.1 - 5.2 cc) 4-Stroke .20 - .26 cu in (3.3 - 4.3 cc)   Elevator     9/16 inch 14 mm Up and Down     Rudder   1      inch  25 mm Right and Left   Ailerons Up   3/8 inch 10 mm       Ailerons Down   3/8 inch 10 mm       Center of Gravity 3  1/2 inch 89 mm From leading edge   Dihedral   6      degrees 6 degrees Total     Incidence   + 1-1/2 degree wing, 0 degree stabilizer       Engine Offset  6 degree down, 0 degree right                             English Metric Number Required   Main Wheels   3      inch 76 mm 2     Tail Wheels   3/4 inch 19 mm 1     Fuel Tank   6 ounce 177 cc 1     Spinner   1.75 inch 44 mm 1     Covering   3 rolls depending on trim scheme

KIT FEATURES
Light Weight Balsa Structure Strong Wing Design Engine Mounts SIG Easy Hinges Decals Complete Pushrods and Hardware Pre-Shaped Balsa Rudder	Easy-To-Build Interlocking Balsa Fuselage Pre-Shaped Balsa Leading Edges Pre-Shaped Balsa Trailing Edges Pre-Shaped Balsa Ailerons Pre-Shaped Balsa Elevator Photo-Illustrated Assembly Manual Formed Aluminum Main Landing Gear
Kadet LT-25 Kit Instruction Manual Click title to open in a new window. Complete Pdf (3.0 Mb) Download