products

SIG Aircraft Lettering A large 4-1/4" x 11" sheet of typical black lettering appearing on both military and civilian aircraft.Each in several...

Aircraft Lock Nuts These plated steel aircraft lock nuts come with a special nylon insert to help prevent loosening from vibration. They are...

Compact Control Line Profile Stunter Easy to build, good beginner's stunt plane. It's thick fully-symetrical wing and short tail moment w...

SIGTempered Spring Aluminum                              Tapered Flat Landing Gear Blanks SELECT USING DROP DOWN MENU

  “Recommended For Beginners!” When Hall of Fame modeler Frank Ehling set out to design a simple little rubber power model that AMA could us...

  Larger Version Of The Famous AMA Cub! The AMA RACER is another model designed by Frank Ehling for beginners. Very similar to the legendary...

  America’s Flying Legend   The full-scale Piper J-3 Cub is easily one of the most recognizable airplanes in the history of aviation. The Cub h...

Replacement Parts 1/5 Scale Anniversary Piper J-3 Cub R/C SIGRC82 SELECT PARTS USING THE DROP DOWN MENU

"The Airplane that Wrote the Book On R/C Aerobatics" This is the legendary model that got R/C aerobatics off the ground in 1957. As t...

Replacement Parts Astro-Hog R/C SIGRC55 SELECT PARTS USING THE DROP DOWN MENU

  Control Line Profile Stunter With Flaps National Stunt Champion Mike Stott has designed a profile model that flies like a full-bodied comp...

National C/L Scale winner Mike Stott has designed a neat 1/2A C/L semi-scale profile model of the classic Beechcraft Staggerwing. Simple constr...

Nylon Bellcranks MOLDED FROM SELF-LUBRICATING NYLON FOR SUPER STRENGTH, LOW FRICTION AND LONG LIFE.  90 DEGREE - 1/2 A - 3 INCH - 4 INCH ...

1958 NATS Combat WinnerAuthentic plans with Grade "A" materials and modern hardware Specifications: Wingspan 39.5 in. Wi...

Authentic plans with Grade "A" materials and modern hardware The "Mini-Zilch" is a precision airplane. This ship has been flown many...

SIG Cockpit Coaming For simulating edge typical of most open cockpit airplanes. Tubing must be cut to length, then split lengthwise along o...

 BLIND MOUNTING NUTS PK OF 4 SELECT SIZE USING DROP DOWN MENU

SIG-BOND Recommended uses: General framework assembly Balsa to balsa joints Hardwood to balsa joints Hardwood to hardwood joints External ...

SIG Brass Thrust Washers For rubber powered models 3/64" I.D. x 1/8" O.D. Pack of 10

    For Competition or Sport Flying The Buster, and its companion the Shoestring, were designed for the AMA Scale (Goodyear) Racing event....

Replacement Parts AKROMASTER C/L SIGCL20 SELECT PARTS FROM THE DROP DOWN MENU

Replacement Parts BANSHEE C/L SIGCL11 SELECT PARTS FROM THE DROP DOWN MENU

Replacement Parts BEECHCRAFT STAGGERWING C/L SIGCL17 SELECT PARTS FROM THE DROP DOWN MENU

Replacement Parts BUSTER C/L SIGCL12 SELECT PARTS FROM THE DROP DOWN MENU