 |
 |
Standard Rubber Adapter for 1-3/4" cone
Natural Rubber for general use, fits standard cone on Hi-Tork and Dynatron starters as well as most other brands. SUL605 |
|
| Aluminum Replacement 1-3/4" Nose Cone |
| Machined starter cone with pulley groove. SUL607 |
|
 |
|
 |
Heli Extension
The Heli Extension extends the starter shaft 7-3/8" to reach into heli bodies for starting. Made of high-strength aluminum alloy and comes with rubber insert. SUL612 |
|
| Helecopter Extension |
| Sullivan's Helicopter Extension is machined aluminum and has a 6mm ball shaft end. The extension features one
way bearings and a removable shaft for easy transport. It fits all Sullivan starters (except the Hornet) as well as most other brands. SUL613 |
|
 | |
 |
Rubber Insert- Heli Extension. SUL622 |
 |
| Starter Belt - 17" (432 mm) reinforced rubber belt shaped to fit standard pulley grooves. For boats and helicopters. SUL626 |
|
Silicone Rubber Adapters
 |
- Blue Deep/Narrow for 1-3/4" cone
Long life silicone rubber adapter for long, tapered spinners.
- White Standard for 1-3/4" cone
Long life silicone rubber adapter for standard shaped spinners.
- Red Shallow/Short for 1-3/4" cone. Long life silicone rubber adapter for blunt spinners and prop nuts.
Excellent grip. SUL631, 632 and 633 |
|
| Neoprene Rubber Adapter |
| A specially designed system of back mounting (or strap mounting for four cycle) engines that absorbs engine
vibration, reduces noise, and limits wear and tear on your model. For all standard nose cones. SUL634 |
|
 |
|
 |
Bare Propeller Insert
Steel reinforced Neoprene rubber insert for bare propellers. Cam-out design fits most two blade props to 15" diameter (max prop hub diameter 1"). Cone
not included. SUL635 |
|
 |
Megatron Adapter Spinner |
 |
Soft, high grip silicone reversible rubber insertsfor the Megatron Double Handled Starter.
Red For 1-3/4" to 3-1/2" Spinners - SUL636
Green for 2-1/4" to 6" SUL637 |
|
 |
PowerPac Battery Case
Holds 12 Sub-C NiCad batteries, providing 14.4V of high amperage power. The PowerPac will deliver as much
torque as a motorcycle battery. Fits all Sullivan Starters as well as most other brands (may require minor bracket modification). For 24V applications, two
PowerPacs and be connected in series. The case features glass filled resin construction, cooling slots and bronze contacts (no soldering is required).
Includes: UL listed trickle charger. NiCad batteries and starter not included. Uses twelve 1200 mAH or higher Sub-C NiCad batteries. SUL640 |
|
| Banana Plugs |
| Heavy duty M/F plugs for Sullivan starter cords. Can be soldered or attached with set screw. Fits wires
to 12 gauge. Complete with heat shrink insulation. SUL645 |
|
 |
|
 |
Heavy Duty StarterCord- 15ft of stranded copper 10 gauge 24V power cord. Suitable for all larger Sullivan starters. SUL653. |
 |
| 3" Machined Aluminum Nose - Fits most Sullivan Starters, and many other brands. Accepts 3 Inch rubber inserts.SUL630 |
|