 |
| C-Grain Balsa 36 in. |
| A balsa wood sheet cut with the annular rings running through the thickness of the sheet is known as
C-grain. A C-Grain sheet will be very rigid edge to edge and cannot be bent without splitting. |
|
| But when used properly, it helps to build the lightest strongest models. Most warp resistant type. DO: Use for sheet balsa
wings and tails, flat fuselage sides, wing ribs, formers, trailing edges. Best type for HL glider wings and tails. DON'T: Use for curved planking, rounded fuselages,
round tubes, HL glider fuselage, or wing spars. |
|
|