 |
Electronic Ni-Starter |
| The On Board Electronic NI-STARTER® is unique in its size and performance. When the radio is turned on it
goes out and tests the glow plug before any attempt to start the engine has taken place. If the plug is good, a high intensity solid RED LED comes on.
If the plug is bad, the RED LED will flash bringing attention to the problem. Touching the arming button fires up the glow plug for thirty or sixty seconds. |
|
| The time is selected by the user with the built in switch. The firing of the plug is
confirmed by a high intensity GREEN LED. During the starting procedure should the user want to turn off the glow plug ignition it is done by retouching
the arming switch. The glow plug power can be turned on or off as many times as the user needs too. Now during the operation of the model the
Electronic Ni-Starter® continues to monitor the glow plug. If a plug failure takes place the high intensity RED LED will be flashing when the model is
retrieved. Turning off the radio turns off the Electronic Ni-Starter®. The Electronics Ni-Starter® is 1 3/4" x 2" x 3/4" and weighs only 2.8 oz. This
compact unit contains a preprogrammed microprocessor for outstanding performance, plus it contains enough power for 45 or more starts and it is
rechargeable. |
|
|